中文简体
ENGLISH
O-type Microreactor
Release time：2019-09-30 11:52:40
O-type Microreactor
O structure, 3D print no seal structure, can used in harsh environment as super high temperature, deep cold temperature,high pressure, no solvent and so on;
Working capacity:0~200 mL/min;0~400 mL/min(Lab scale); ~1L/min,~2L/min,~5L/min(Pilot scale）；Customize Scale-up
Inlet/ outler: three in one out( 1 for temperature detector)
Working Pressure：Atomspheric Pressure~4 Mpa
Working Temperature：-20~250ºC
Seal Material：Perfluoroether FFKM75
Medium Contact Material：SS 316L